Modern construction technologies focus on speed, energy efficiency, and cost-effectiveness. One of the most востребованных materials in industrial and commercial construction is the sandwich panel — a multi-layer structure that provides reliable thermal insulation, structural strength, and an attractive building appearance.
Today, sandwich panels in Uzbekistan are widely used in the construction of warehouses, industrial facilities, shopping pavilions, and administrative buildings. Thanks to their technical characteristics, this material has become an essential part of fast-track construction systems.
A sandwich panel is a three-layer construction element consisting of two metal facing sheets and an internal insulation core. The insulation layer may include mineral wool, polystyrene foam, or other modern materials.
This structure provides:
• high thermal insulation
• resistance to mechanical loads
• protection against moisture and temperature changes
• long service life
• easy installation
The use of sandwich panels significantly reduces construction time and overall project costs.
Sandwich panels in construction perform the function of not only building cladding but also the primary thermal and acoustic insulation. Depending on the purpose of the building cold storage, production workshop, or shopping complex, the internal filler material of the panels must be chosen correctly. Today, three main types of insulation are used in production:
PIR (Polyisocyanurate) and PUR (Polyurethane) panels: These materials provide the highest thermal insulation performance in modern construction. PIR panels especially stand out for their fire resistance do not support combustion and absolute moisture proofing. This is an ideal solution for cold storage warehouses and fruit and vegetable storage facilities.
Mineral wool-based panels: The main advantage of this type of panels is their 100% fire safety classified as non-combustible materials — NG. The use of mineral wool panels is mandatory in the construction of large plants, textile factories, and public buildings with high fire safety requirements.
Expanded polystyrene (Foam) panels: The most economical, lightweight, and easy-to-install type of material. It is moisture-resistant and widely used for small commercial pavilions, temporary buildings, and structures.
The climate of the region requires materials capable of withstanding both high summer temperatures and winter fluctuations. For this reason, sandwich panels in Uzbekistan are in high demand.
Energy efficiency
The multilayer structure provides effective thermal insulation and reduces heating and cooling costs.
Fast installation
Panels are delivered ready for installation and are easily mounted on a steel frame.
Lightweight construction
Low weight reduces the load on the foundation and optimizes its cost.
Durability
Metal surfaces are protected with anti-corrosion coatings.
Aesthetic appearance
Modern panels are available in a wide range of colors and textures.
Sandwich panels are widely used in fast construction projects, including:
• warehouses and logistics centers
• manufacturing plants
• retail pavilions
• cold storage facilities
• agricultural buildings
• administrative and office buildings
Their versatility makes them suitable for both large industrial complexes and smaller commercial projects.
Choosing to buy sandwich panels is justified when speed, efficiency, and reliability are critical.
Compared with traditional building materials, sandwich panels provide several advantages:
• faster project completion
• reduced labor costs
• lower finishing expenses
• possibility of dismantling and reuse
• resistance to climatic conditions
Additionally, installation does not require complex construction equipment.
High-quality sandwich panels are manufactured according to strict technological standards. Metal sheets are processed and coated with protective polymer layers.
The insulation core is securely fixed between the outer layers, forming a strong and airtight structure.
Available panel types include:
• wall panels
• roof panels
• fire-resistant panels
• special panels for cold storage facilities
The specific type is selected depending on the building purpose and operational requirements.
The use of sandwich panels significantly optimizes construction budgets. Their lightweight structure reduces foundation costs, while quick installation lowers labor expenses.
For businesses, this means faster project commissioning and shorter investment payback periods. That is why sandwich panels in Uzbekistan are widely used in industrial and commercial construction.
Proper calculation of panel thickness at the design stage is crucial for maintaining the internal climate and optimizing energy consumption. Considering the hot summer and cold winter in Uzbekistan, engineers recommend the following parameters:
For wall panels: For ordinary industrial buildings and warehouses, a minimum thickness of 50 mm to 100 mm is sufficient. If the building requires increased energy efficiency, wall panels with a thickness of 120-150 mm are used.
For roof panels: Since the roof takes on direct sunlight and must withstand snow loads in winter, its thickness is recommended to be greater than that of the walls (at least 100-150 mm).
For cold storage and freezer rooms: Since the internal temperature in industrial refrigerators is maintained at -18°C to -24°C, the thermal insulation there must be maximum. For such facilities, large thickness PIR panels from 150 mm to 200 mm are used.
Products glued manually in makeshift conditions or small workshops lose their properties over time — the metal sheet and the insulation layer will delaminate from each other. At the Mirankul Group plant, the production process is fully automated and has the following advantages:
Perfect adhesion (bonding): A special two-component glue is applied evenly across the line and heated under a high-pressure press. This ensures a durable bond between the metal and the filler for the entire service life.
Geometric accuracy: The automated line cuts panels with millimeter precision. This guarantees that during installation, the panel locks will fit each other without problems or gaps, ensuring the airtightness of the building.
Certified raw materials: Only metal coils with a high zinc content and a polymer coating resistant to sunlight are used in production. If you need reliable panels in Tashkent at the best prices from the manufacturer, you are in the right place. For the successful construction of industrial facilities, it is necessary to buy panels directly from the factory on the best terms. You can find more detailed information about the company's capacities on the website, and for placing a quick order, you can also guide your partners to the сэндвич панели купить section.
Buying a quality product is only half the battle. If technological errors are made during the installation process, the panels may lose their thermal insulation properties, and the joints of the building will start to leak water. The most common mistakes in construction:
Incorrect joint sealing (germanization): The joints of the panels (lock parts) must be completely sealed with special sealants or sealing tapes. Otherwise, in winter, cold will penetrate through these places, forming "thermal bridges".
Incorrect selection of fasteners (self-tapping screws): Using self-tapping screws that do not match the thickness of the metal frame or do not have a rubber washer gasket leads to rainwater seeping through the attachment points and metal corrosion.
Failure to remove the protective film in time: The protective film from the surface of the panels must be removed at most 2-3 weeks after the completion of installation. If left for months, the film will firmly stick to the metal under the influence of sunlight.
Incorrect cutting of panels: It is strictly forbidden to use abrasive tools grinders when cutting. The high temperature burns away the zinc layer and the polymer paint, causing the panel to quickly start rusting.
The capital's booming construction market demands exceptional speed and durable materials. If you plan to buy sandwich panels for a warehouse, commercial center, or industrial complex in the Tashkent region, we offer tailored solutions to match the high standards of the capital’s developers.
To provide maximum convenience for our clients, Mirankul Group operates a dedicated sales office in the capital. Even though our primary manufacturing facility is located in Samarkand, sourcing premium sandwich panels in Tashkent has never been easier. You can manage your orders directly through our Tashkent office, and we will handle the logistics, ensuring direct shipment straight to your construction site in Tashkent.
One of the most frequent inquiries from local developers is the actual cost per square meter for projects in the capital. When looking for a sandwich panel price Tashkent option, it is essential to consider the key components of the final cost:
Core Insulation Material: Energy-saving PIR to lower cooling costs during Tashkent summers or fire-resistant mineral wool.
Thickness Specifications: Lightweight options for interior partitions or heavy-duty panels for roofing and exterior walls.
Streamlined Shipping: Thanks to our regular shipping schedules to the capital, the sandwich panel Tashkent price remains highly competitive and affordable for local enterprises.
If you want to secure the best materials for your project, browse the sandwich panel Tashkent sections on our website and request an individual quote directly from our experts at the Tashkent sales office.
A construction project using sandwich panels typically includes:
• selecting the appropriate panel type
• calculating material requirements
• manufacturing and delivery
• installation on a steel frame
• quality control and sealing verification
This approach ensures structural reliability and long-term building performance.
For more details and to explore our full product range, visit our Product Catalog
